|
Product Details:
|
| Connector: | SC-SC (SC-LC , LC-LC ,ST-LC ,ST-SC )any Connector | Polish: | PC / UPC |
|---|---|---|---|
| Fiber Count: | Duplex | Insertion Loss: | ≤ 0.3dB |
| Fiber Type: | Simplex And Duplex, G652D, G655, Anything, SM Or MM | Insertion Loss: | ≤0.3dB, < 0.2dB, <=3.0 DB |
| Material: | PVC, LSZH |
fiber optic patch cord name
MCP SC PC to SC UPC duplex 62.5/125 fiber optic mode conditioning patch cord 3meter
How the Mode Conditioning Cable Works
The need for this conditioning fiber optic patch cord is due to the single-mode launch nature of the-LX or long-wave(1300nm) transceiver modules used for Gigabit Ethernet.
Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuse the receiver at the other end of the fiber.
In that case, a mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. This offset point creates a launch that is similar to typical multimode LED launches. (see diagram below)
fiber optic patch cord Technical Parameter
| Parameter | Specification | |||||
| Insertion Loss | Light Source Transmission Direction | Testing Wavelength | Insertion Loss | |||
| D→B | 850nm, 1,300nm | Max .≤ 0.30dB | ||||
| B→D | 850nm, 1,300nm | Max .≤ 0.30dB | ||||
| C→A | 850nm, 1,300nm | ≤ 15.0dB(50/125um); ≤ 18.0dB(62.5/125um) |
||||
| A→C | 850nm, 1,300nm | Max .≤ 0.30dB | ||||
| C→A | 1,310nm, 1,550nm | ≤ 2.10dB(50/125um); ≤ 2.60dB(62.5/125um) |
||||
| Return Loss | SM APC≥60.0dB; SM UPC≥50.0dB | MM PC≥35.0dB | ||||
| Durability | 1,000 mating, typical≤0.20dB | |||||
| Operating Temp | -20℃ to +70℃ | |||||
| Storage Temp | -40℃ to +85℃ | |||||
Contact Person: Alice
Tel: 0086-13534063703
Fax: 00-86-85242074
