|Connector Type:||MPO / MTP TO MPO / MTP||Material:||LSZH, OFNP Or OFNR|
|Mode Type:||OM4||Core Type:||12 Core|
|Length:||Can Be Customized According To Your Requirements||Certificate:||CE , ISO , RoHS|
|Delivery Time:||2-7 Working Days After Received Deposit||Production Ability:||500 Pcs / Day|
|Payment Term:||T/T , 30% Deposit In Advance||Connector:||MPO,MTP|
|Color:||Aqua,orange,yellow,Yellow/ Red/ Aqua|
mpo fiber cable,
mpo to mpo cable
MTP – LC 12 Fibre Singlemode Breakout Harness Cable with low loss connector
Maximum transmission distances
1. The IEEE standard states maximum distances based on loss budgets for OM3, OM4 and singlemode transmission.
2 . Distances vary depending on a number of factors including no. of mated connector pairs and cable routing.
3 . Complete Connect’s technical team can provide all the relevant information concerning loss budgets and allowable distances.
Testing using Loopback adaptor cables
MTP loopback cables can be used to test individual trunk cables.
LC loopback adaptors can be used to test full channels.
MPO MTP Cable Technical Parameter
|Connector||MPO/MTP(F or M)||MPO/MTP (F or M)|
|Operation Temperature||-40°C ~ +80°C|
|Storage Temperature||-40°C ~ +85°C|
SM: ≤ 0.75dB (standard value), ≤0.35dB (typical value);
MM:≤ 0.50dB (standard value), ≤0.35dB (typical value);
|Return Loss||SM:≥60dB; MM:≥35dB|
|The MPO end type||Male: with guide pin; Female: without guide pin|
|Fiber count||8,12&24 fiber|
|Connector type of the other end||MPO-female , MPO-male , FC , SC , ST , MU , LC , E2000|
|Fiber mode||Single-mode (G652,G655,G657), multi-mode (50, 62.5, OM2, OM3, OM4)|
|Fiber cable type||250um ribbon fiber,ribbon cable,Bundle fiber optic cable|
Application within duplex 1G to 10G Ethernet networks
For these applications, MPO patch cables with 12 fibre connectors and 12 fibre cables are predominantly used. They are mainly located in distribution areas where high density patching fields are required. Using MPO patch cables as opposed to standard duplex LC – LC patch cables increases the patching density by a factor of six. Typically, these MPO patch cables will be polarity C and will have male MPO connectors and will connect to polarity C trunk/backbone MPO cables. The trunk cables will have MPO female connectors.
Application within duplex 25G Ethernet networks
This is the newest application for MPO patch cables. These cables use 8 fibre MPO connectors and 8 fibre cable and are used for BASE-8. although at the time of writing this application is in the early adoption phase it is projected to grow rapidly as more equipment is produced at 25G data rates.
Application within 40G and 100G SR4 or PSM4 Ethernet parallel transmission networks
Typically, these cables will use an MPO 12 fibre connector and 12 fibre cable. However, in the transmission of SR4 40G or 100G Ethernet only 8 fibres within these cables are used. The advantage of using 12 fibre cables (as opposed to 8 fibre) is that the cabling is often used alongside duplex 10G networking and so these cables can have multiple purposes and offer greater flexibility with negligible cost difference.
The three polarity methods Type A, Type B and Type C are used to guarantee the right bi-directional allocation.
We will pack it by OPP bag and carton box outside . in order to protect the goods are not damaged when delivery .
Contact Person: Alice